My passion for the GeeBee started at the age of 12 and has not changed since then. For a few years I flew an electric powered GeeBee equipped with a Hacker A200 and 2x 12S 5000mAh but sold it in 2019. Last year I had the chance to get another damaged R2 and decided to restore it and install a Fiala 250ccm 5-cylinder radial engine, the same engine I’ve been using in my Bücker for the past 2 years.
The fuselage was damaged in different areas and it turned out to be much more work than expected. My procedure was as follows:
Opened the compressed areas with a cutter until the inner side of the sandwich. Removed the compressed and crumbled support foam.
Filled up the opened areas with thick epoxy and sanded it down
Put a layer of glass fabric above and sanded again
Puttied and sanded all
Fillered all fixed areas, sanded and reworked the panel lines with a fine rasp
Made rivets out of white glue
Slightly weathered with black oil color
The effort was well worth and I am super happy with the result. I hope the model lasts long.
When I bought the GeeBee I contacted FALCON to produce a scale prop in the correct size for the radial engine. And the result is a stunning 34×18 prop which fits and looks excellent. Even the measurements are almost correct compared to the full size.
The equipment of the GeeBee is proven in my other models: Hacker DITEX EL-3214 servos, JETI CB-220 with 2x RSat and RCSW. 2S Hacker ECO-X batteries, ClickConnect for the motor unit, EMCOTEC smokepump and 2 kevlar tanks by CM-Jets.
In this model I used a gyro for the first time. The Cortex Pro by Bavarian Demon was my choice as it is the best system working with JETI model and can be set up directly from the transmitter, no computer needed. And it is connected straight between the 2x RSat and the Central Box. So easy!
After my stressful 5th semester at studies I had the desire to build something out of Balsa again. At the exhibition in Friedrichshafen I saw the kits of mini vintage gliders from Tony Ray at the Pichler booth. Right after the event I ordered a kit of Minimoa.
With the support of my 3D printer and covered with japanese paper and Graupner Spannfix a really nice little vintage glider was born.
Check the pictures and see the progress of my little Minimoa.
After a few weeks without any new report here I decided to drop a few lines about the UltraBANDIT proejct from last summer…
In 2018 BVM-Jets announced a jubilee version of their legendary UltraBANDIT which was a “must have” for my father. It took almost 2 years until he started to build the plane in January last year.
State of the art equipment had to be installed: brandnew JetCat P250, Hacker / Ditex Servos, JETI model CentralBox-220 with 2x 2,4Ghz + 900mHz Backup-RX, Electron retractsystem and a custom smoke tank from CM-Jets.
While my father was building the jubilee UltraBANDIT, I completely reworked the older UltraBandit. It got also an electric landing gear, stronger “Low Voltage” Hitec flap servos and a JETI model CentralBox-400 with 2x 2,4Ghz + 900mHz Backup-RX. The CB-400 is required due to the older Futaba LV-servos which need only 5,9V.
Overall it was much more work than expected, as the electric gear has completely different design and other measurements. That´s why I needed to remove some of the old gear mounts and let my friend cut new carbon flex-plates for main- and nosegear – Thanks Manuel!
In July we finally made both maidenflights.
Conclusion: The “old” UltraBANDIT is still in a league of its own. The quality, the details and the extremely balanced flying is in my opinion still unrivaled.
All the work paid off, both airplanes fly excellent! Especially the JetCat P250 with its fast start, fast throttle response and the support of turbine telemetry make it a good progress in turbine flying.
The knowhow in this 15 year old design is still in the pole-position!
I am very happy to see one of the best builders we have in F3A building on of my planes and giving aeromodellers around the world the chance to follow each step he makes.
Isaac Najary from Israel writing in famous american RC-UNIVERSE forum a detailed report of his KARAT biplane building.
Unfortunately a clubmember crashed my Acrostar and damaged the gear, the gear frame, the wing support, the landing gear covers wheelpants and cowling.
I thought about building a completely new Acrostar or just fix the fuselage.
I decided to do the second option and took some pictures during this process…
My message with this post: You don´t have to throw it away immediately 😉
The delivery of series product of Acrostar XL has started and here are some additional tipps / information.
The wing tube which is included in the kit, was changed due to my wish. More specifically the wall thickness has been enlarged to get a stronger tube. The new tube is also used by the manufacturer for another airplane. So It could be possible that you need to cut the tube around 10mm.
I recommend to modify the tail wheel as shown on the picture. Just one washer and no lock-nut between the bracket and the wheel.
If you use long servo arms, it is useful to install the ball link below the servo arm. Otherwise the ball-linkage will touch the servoarm if you have big deflections.
I recommend to tape all control surfaces with flexible, transparent surgical tape.
The result is a much better effect of those functions.
Kurz vor Jahresende sind zwei tolle mehrseitige Testberichte vom Acrostar mk 2 in deutschen Fachzeitschriften erschienen. Ralph Müller hat den Acrostar für die FlugModell Ausgabe 02/2019 getestet, Nils Brückner für den Branchenprimus FMT Ausgabe 01/2019.
Beide Autoren berichten ausführlich über den Bau, mögliche Modifikationen, aber auch das Original oder die unterschiedlichen Antriebsvarianten.
Beim Test der FlugModell ist mit mir ein kleines Interview zum Acrostar, seine Geschichte und wie es weiter geht, dabei.
Beim Test in der FMT hat Nils Brückner den Cockpitausbau näher beschrieben und sogar über die FMT einen PDF-Plan zur Verfügung gestellt, den Link zur FMT-Website gibt es hier!
Beide Testberichte sind absolut lesenswert- vielen Dank euch Beiden!
Nun danke ich allen Besuchern meiner Website und wünsche einen guten Rutsch und alles Gute für 2019!
Tolles Bild von einem stolzen Acrostar Pilot: Bendix Bode
Die first part sets for KARAT biplane have arrived and go straight to their customers.
But before I would like to show you some impressions.
The weight of all plane parts incl. battery plate, servo plate, motor plate, landing gear and pants is around 2150g.
Prices and delivery time on request or via our distributors.
Christian Oppliger from Switzerland tested ULTRAmate and has a tip for all who want to push the limits of that plane a little further.
Many thanks for the information and your help!!!
I programmed 2 mixers:
Ailerons —>Throttle 8%
Elevator —> Throttle 8%
Due to the high control effect of ailerons and elevators I added a mixer to this functions of 8% throttle. So the control surfaces are better flown on and the effect of them is higher.
That also means, that the plane with full deflections not brakes down that much and flies more dynamic and in extreme maneuvers even more stable. The reason for those mixers is coming from the F3P-scene where they use it actively to keep the speed constantly during rolls. I tried it in 3D models as well and found it very helpful, especially when the planes have very big control surfaces like ULTRAmate.